Capstone Project

I am considering sponsoring a capstone project at Florida Polytechnic this year. I believe I have a compensating nozzle that could be checked out within the two semesters the project would last. I had an intern from the school this last summer to work on remote control and robotics for small construction equipment. If I can get them to move on hardware, we should have cold flow tested before Christmas.

If Verification of compensation with cold flow is done, does anyone have a connection with hot fire testing capability that could be done at little or no cost? If so, what sizes and what propellants would be allowable?

I have lost touch with the people that I would have asked a decade ago. And several of the companies they were associated with are gone.

The following two tabs change content below.
johnhare

johnhare

I do construction for a living and aerospace as an occasional hobby. I am an inventor and a bit of an entrepreneur. I've been self employed since the 1980s and working in concrete since the 1970s. When I grow up, I want to work with rockets and spacecraft. I did a stupid rocket trick a few decades back and decided not to try another hot fire without adult supervision. Haven't located much of that as we are all big kids when working with our passions.
johnhare

Latest posts by johnhare (see all)

johnhare

About johnhare

I do construction for a living and aerospace as an occasional hobby. I am an inventor and a bit of an entrepreneur. I've been self employed since the 1980s and working in concrete since the 1970s. When I grow up, I want to work with rockets and spacecraft. I did a stupid rocket trick a few decades back and decided not to try another hot fire without adult supervision. Haven't located much of that as we are all big kids when working with our passions.
This entry was posted in Uncategorized. Bookmark the permalink.

One Response to Capstone Project

  1. Robert Clark says:

    Glad to see any work on altitude compensating engines. One thing that hurts further research on them is there is no simple way to estimate the payload possible using them like the rocket equation does for fixed nozzles.

    So one facet of your students proposal might be to estimate what would be the payload increase if alt.comp were given to existing rockets, such as the Falcon 9, Atlas V, Delta IV, Ariane 5 etc by doing a full trajectory simulation using alt.comp. There are programs available that can do this from NASA such as POST and OTIS.

    About help with hot flow testing, I know Robert Zubrin’s Pioneer Astronautics offers to assist researchers with their projects, and according to their web page they have a rocket test stand available:

    http://www.pioneerastro.com/contract-research-and-development-services/

    Bob Clark

Leave a Reply

Your email address will not be published. Required fields are marked *